High Output Super Smoker with Accu-fill - a high quality, high output and proportional smoke solution that will fit the same footprint as your stock tank smoke unit
Super quiet fan operation - eliminating the noisy stock "piston" pump operation
Already one of our best sellers - ideal for tanks, ships, tugboats, trains and train layouts
Super efficient - very low power consumption, neglible effect on tank run time
Proportional - smoke output directly proportional with speed of motor
Larger exhaust tubes to eliminate clogging that is typical with other smokers
Accu-fill system eliminates chance of under-filling or over-filling
More time between fill-ups - each Super Smoker fill-up should last at least one hour
Non-toxic glycol based fluid offers realistic "hang time" of smoke
Since the fluid is not oily, any residual or spilled fluid can be cleaned up with a damp cloth
Ideal for use on your battle field for smoke screens and burned out buildings
Ideal for use in boats and ships (select smoke stack at checkout)
Available for 6v, 7.2v, 8.4v, 9.6v and 12v systems; 7.2v systems are standard, all others must be specified at time of order
Package includes smoker and all necessary plugs/connectors, smoke fluid, exhaust tubes, Accu-fill and installation instructions
Custom fabrication to meet your modeling needs is also available

Smoke fluid for High Output Smoker (4 oz). Enough fluid for 6-12 hours of run time when used with the RCC High Output Smoker.

Smoker manifold for tank

Smoker stack for ships/boats

Exhaust tubing (2 x 8" lengths)

Track tensioner for Jagdpanther. Kit includes all parts necessary for complete installation - screws, washers, bushings, axles and tensioner assembly. Simple installation instructions also included.

Fan box set for all models of PIII. Use with photo-etched brass grille set to add even more detail to your tank.

Premium metal road wheel set for Henglong and Tamiya Jagdpanther. Each wheel comes with double, shielded ball bearings, rubber tread, axle and center cap

Premium metal drive and idler wheel set for Jagdpanther. Idlers come with shielded bearing. Includes metal drive wheel and center cap(2), metal idler wheel and center cap(2) and brass idler axle(2)

Metal drive and idler wheel set for KV-1. Included: metal drive sprockets and center caps, metal idler wheels and center caps, idler wheel axles, and drive sprocket axles. Idler wheels fitted with dual bearings on each wheel.

Track tensioner for Panzer IV

Spare track links & holders for Tiger I (includes 7 upper and 7 lower holders)

Metal tow shackles for KV-1

Complete turret and upper hull for Tiger I (early). Includes metal barrel, driver & radio operator hatches, metal headlights, brass muzzle brake, full recoil, elevation and barrel flash.